Yeah. In 2007 I had a guy named Peter do the cushions. He did a great job and had a proper work station with sewing machines. Outstanding quality. I had a standard Green, Maroon, Blue, etc, and would buy Peter these giant rolls (not sunbrella) and pay for upgrading the foam density. Sadly Peter aged out and died at 92. But his son continues, doing upholstery for chairs, couches, custom cushions for motor homes and such. On the 15 we supplied that extra cushion for the top of the board over the porta potti area and that particular “board” would lift out and one could Spin around and use it for a privacy barrier for privacy (it fits perfectly into the slots for the companionway on the 15) (give credit to Jerry for that idea) you can use that board as a pattern for the missing cushion. Silicon..? No never. Where do these rumors start..? .hahahaha. Also Never 5200. We used Boatlife Caulk or 4200. Per Dave’s advice. There is NO PLACE for silicon for Bote bedding. Be Well Bob Eeg. Sent from my iPad
On Feb 23, 2022, at 5:58 AM, Dave Scobie <scoobscobie@gmail.com> wrote: Ernie:
The fabric is likely Sunbrella. Either contact a local canvas shop or reach out to Sailrite.com
DON'T use silicone!!! (Only one place silicone is used and not never no no no for deck hardware.) Use Sikaflex 291 or 3M 4000/4200 (not 5200!). The better is the _black_ Sikaflex as it sticks better to teak than than the white.
:: Dave Scobie :: M6'8" #650 :: Baba 30 #233 DEJA VU :: SV SWALLOW - sv-swallow.com :: former owner M17 #375 SWEET PEA - m17-375.com :: former owner M15 #288 SCRED - m15namedscred.wordpress.com <<-- new site!
On Tue, Feb 22, 2022, 3:50 PM Ernst van Gulijk <Ernst@nteglobal.com> wrote:
Hello All,
Two quick questions:
1. I am adding a cushion to the 'empty' spot in front of the porta-potty. I would like the fabric to match the rest of the cushions. On my 2007 M-15, the fabric is plum/dark burgundy in color. Can someone tell me where I can source the same, of similar fabric?
1. I removed all wood trim this winter for a thorough cleaning and refinish. I am about ready to reinstall and understand that one is 'supposed' to use a marine-grade (white) silicon as a sealant. When using the sealant, is there a trick to ensure not too much oozes out and thereby stains the newly finished wood and surrounding surfaces? I have used silicone sealants around the house, and am familiar with their composition. Is it as simple as not applying too much, or does one use painters tape to mask/protect, or other tricks?
Regards,
Ernie