Thanks Keith for the further info. Good to hear you are choosing options based on others' positive real world experiences. It can be hard to cut through all the self-promotion by designers/makers of these devices! I have been looking at the Rocna info among others and yeah, the Rocna 4 is probably adequate for an M17, and the 6 looks like solid secure overkill as a primary anchor. Keep us posted on how it works for you. The types of anchorages where I would most need something are up your way (San Juans, & Canadian islands north of there). cheers, John S. On 06/06/2016 11:15 PM, Keith R. Martin wrote:
Most of the anchors I have used are either danforth's on smaller boats or Bruce's or some similar knock off on larger vessels (large for me is 27 to 36 ft)
In the case of danforth's in more exposed & rocky anchorages up here they just don't seem to reset well..
The Bruce's are popular up here but my limited experience with them is you seem to need to select them in biggie size to get the job done, invariably it just seems like a lot of anchor to manhandle.
A number of guys at my Marina have had really good experience switching to these new scoop type anchors (Rocna, Manson etc) that have performed well for them in a wide range of environments, including rocky anchorages..
So when a Rocna 6 (13.2lbs) came up for sale on Craigslist for $175 Cdn, I snapped it up... Based on the Rocna sizing guide this should be more than plenty even for a heavier exploration rigged M17 like mine..
So I guess time will tell.. I am dying to get out and try it..
Keith On Jun 6, 2016 10:43 PM, "John Schinnerer" <john@eco-living.net> wrote:
Absolutely...I was just addressing sizing considerations and not bottom types vs. anchor types.
What does work well in rocky/reefy bottoms? And can be retrieved from same? Ideally I suppose one wants to avoid anchoring in those kinds of places but sometimes it's unavoidable...
Curious why you chose the Rocna. I've been looking at those among others. Spendy...but worth it? Or just pricey 'cause they're patented?
cheers, John S.
On 06/06/2016 10:38 PM, Keith R. Martin wrote:
I also think Connie hit the nail on the head (as he often does) when he points to different environments needing different anchor set ups...
Certainly the wind and waves are a big part but also the type of sea or lakebed bottom.. My danforth works really well in a sandy or mud bottom, but a lot less so in rocky conditions. It doesn't set as reliably and it certainly doesn't reset very well on it's own in a rocky bottom.. On Jun 6, 2016 10:26 PM, "John Schinnerer" <john@eco-living.net> wrote:
I've been reading up on anchoring stuff lately too...working on deciding
what to get for my 2nd anchor (Pajarita came with a Danforth, 8 lb. I think, and a nylon rode with no chain, will be addressing that first).
Point being, I am gathering that wind & waves are a bigger factor than current (unless you are trying to anchor in Skookumchuck narrows or something like that). Most of the articles & anchor ratings talk about what storm force one wants which anchor for; or what storm force a given maker's ratings are based on.
This emphasis on wind/waves as what to plan for is reinforced by multihull recommendations (typically more windage) being a size or two larger than monohull, even though boat weight is often less to a lot less for the same LOA because no need for ballast.
cheers, John S.
On 06/06/2016 10:14 PM, Jazzy wrote:
Btw Keith, I have the same anchor now (8lb danforth) and it's been
working fine. I did a test anchor in probably 5kts of current under the narrows bridge and it held. I was in about 15 feet of water with 10ft of chain and 75ft ish of line. I was actually steering the boat back and forth at hull speed...lol. But I wouldn't want to leave it there a week!
Jazz On Jun 6, 2016 8:49 PM, "Keith R. Martin" < keith.richard.martin@gmail.com
wrote:
Thanks Jazz,
Now the pressure is on :-)! I will be sure to post some pictures as soon as I can... On Jun 6, 2016 8:43 PM, "Jazzy" <jazzydaze@gmail.com> wrote:
You all make valid points. I arrived at the 22lb bruce type anchor by advice from a salty old dude that has been anchoring out permanently for years and has watched many boats drag by him or into him..lol. He seemed very experienced and knowledgeable. He rowed over from his Westlake and asked about El Nino, then we got into this topic, so he was aware of what boat we were talking about. It's possible that I'd be anchored out there all summer and be gone from the boat for extensive periods, so I think overkill is the word here. He passed me his phone number to verify my work or help, so I'm happy about that!
I'm still chasing down the last remnants of mooring leads but it doesn't look good, so mooring is plan B. Basically this anchor setup is a pseudo mooring ball, but I can't actually place a mooring ball.
I'm def looking forward to those pics! I wonder if the 5 gallon bucket presents a sleeping obstacle? I want my anchor to be instantly deployable, so bowsprit type deal seems ideal if it's workable.
Jazz
--
John Schinnerer - M.A., Whole Systems Design
- Eco-Living - Whole Systems Design Services People - Place - Learning - Integration john@eco-living.net - 510.982.1334 http://eco-living.net http://sociocracyconsulting.com
-- John Schinnerer - M.A., Whole Systems Design
- Eco-Living - Whole Systems Design Services People - Place - Learning - Integration john@eco-living.net - 510.982.1334 http://eco-living.net http://sociocracyconsulting.com
-- John Schinnerer - M.A., Whole Systems Design -------------------------------------------- - Eco-Living - Whole Systems Design Services People - Place - Learning - Integration john@eco-living.net - 510.982.1334 http://eco-living.net http://sociocracyconsulting.com