Thanks Clarence. I'll check these guys out. I can't believe I've had so hard a time finding this fastener. The tap was available locally, but when it came to the machine screw, I was SOL. Again, thank you. t Tom Smith & Jane Van Winkle Sandpoint, Idaho M15-345, Chukar M17-064, Unnamed -----Original Message----- From: n9ca [mailto:n9ca@comcast.net] Sent: Tuesday, December 30, 2003 7:59 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: 12-28 fasteners? You can find the fasteners you need at: Wicks Aircraft Supply 410 Pine Street Highland, IL 62249 800-221-9425. The countersunk screw heads used in aircraft are 100 degrees, which is not the same angle as those you'd find at an ACE HARDWARE . Wicks is a first class outfit, and gives first class service. Clarence Andrews M-17 Carpe Ventum --- Original Message ----- From: "Smith, Tom" <Tom.Smith@itron.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Monday, December 29, 2003 5:55 PM Subject: RE: M_Boats: 12-28 fasteners? Hi guys. I'm mounting larger halyard cleats on our M15's mast and I bought a 4 inch Schaefer jam cleat that uses a #12 fastener. 12-24s are easy to find. Now, 12-28s are an entirely different story. I'd like to use the fine thread to get a better purchase for the fastener. Anybody encountered an outfit that carries this rare size? Or am I overdoing it. Will the 12-24 work okay? Thanks. t Tom Smith & Jane Van Winkle Sandpoint, Idaho M15-345, Chukar M17-064, Unnamed _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats This message was scanned for viruses!!