9 May
2003
9 May
'03
6:11 p.m.
Doug, I just had to replace my elastic bungee cord on my rudder. Had a dickens of a time getting it through the hole in the tiller. If you wanted to easily swap tillers, consider having the bungee pass over the tiller instead of through it. You would probably want to cut a groove for it to slip into but then you could slip one tiller out and another in without a lot of fuss. The hinge pin could be routed out to the back so that the tillers could slid in and out. Carol II is back at the marina so I can't check it out right now but I suspect that would work well. Stan