Doug Most likely the steel shot in the keel or board has expanded. You can most likely remove the old board and belt sand it a bit to make it thinner. Bob Sent from my iPad
On Aug 1, 2018, at 11:03 AM, doug <doug9326@gmail.com> wrote:
Up until now, the drop keel has worked fine. Not sure why it would change. Didn’t run aground! Didn’t have it drop onto the trailer either. But it has to be fixed soon since it great sailing weather. I still sailed Sunday without the drop keel and the boat did great in 10kts.
On Aug 1, 2018, at 11:01 AM, doug <doug9326@gmail.com> wrote:
Oh yea. Its a 1980 M-15.
On Aug 1, 2018, at 10:52 AM, Bob Eeg <montgomeryboats@hotmail.com <mailto:montgomeryboats@hotmail.com>> wrote:
What model and what year Montgomery.
Bob
Sent from my iPad
On Aug 1, 2018, at 10:47 AM, doug <doug9326@gmail.com <mailto:doug9326@gmail.com>> wrote:
Went sailing on a perfect day Sunday. Until I tried to drop the keel/daggerboard/centerboard/??? and it did not go down. Just stayed in the retracted position. So other than just crawling under the boat on the trailer and fiddling with that thing, are there other thoughts/ideas/solutions?
And if I want to raise the boat some from the trailer to get more room to work and for the board to drop down some, is there a right and wrong way to do that. I was going to use a jack under the forward end of the shoal draft keel and jack up the boat maybe 8 inches that way. Can that shoal draft keel support some weight like that?
Sure is nice to have a forum like this for newbies like me. Thanks