Thanks Skip. I would like to pick your brain. My email is seagray@embarqmail.com Thanks for your help. Joe ----- Original Message ----- From: wcampion@aol.com To: montgomery_boats@mailman.xmission.com Sent: Tuesday, March 23, 2010 1:27 PM Subject: Re: M_Boats: Plexiglass / Lexan Joe, Get your yourself a good router and a jig. You'll cut right through the material and have a nice clean cut. I can assist you if you'd like off list. Skip M-15 #201 1982 Wild Guppy -----Original Message----- From: Joe Murphy <seagray@embarqmail.com> To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Sent: Tue, Mar 23, 2010 1:14 pm Subject: M_Boats: Plexiglass / Lexan Has anyone ever worked with either Lexan or Plexiglass? I'm thinking of making ompanionway doors but I keep hearing about how difficult it is to cut the aterial without it chipping and cracking. oe 17 Seafrog #651 ______________________________________________ ttp://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats Remember, there is no privacy on the Internet! _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats Remember, there is no privacy on the Internet!