Brian, I want to get the Thetford 135 for my M-15 but does this model allow you put the plywood cover and cushion in place and level with the starboard and port berths? --Larry, hull # 189, 1981 model -----Original Message----- From: Brian Ripley [mailto:brian_ripley@yahoo.com] Sent: Thursday, July 22, 2004 2:46 AM To: For and about Montgomery Sailboats Subject: Re: M_Boats: M-15 Boat Review My '88 M15 still has its original Thetford Porta Pottie 235. The 235 has the same dimensions as the 135 with the addition of a locking lid and a level indicator on the waste tank. The level indicator is pretty handy for knowing when to empty but the locking lid probably doesn't add much since the head is fit so snugly in its place. Brian Ripley Roseville, CA --- Jerry Montgomery <jmbn@innercite.com> wrote:
Originally tooled for the Porta Potti 35, which became obsolete a year or two later, replaced by the PP 135. At that time I re-tooled the floorpan to fit the 135. Don't know if they still make the 135 or not.
You can fit the 135 into the early pans by heating the head and forcing it in; I used a hair dryer but others claim good results by filling it with hot water.
Jerry
----- Original Message ----- From: "Hughston, Larry" <Larry.Hughston@dgs.ca.gov> To: "'For and about Montgomery Sailboats'" <montgomery_boats@mailman.xmission.com> Sent: Wednesday, July 21, 2004 8:15 AM Subject: RE: M_Boats: M-15 Boat Review
Jerry, as you know by now I am the new owner of hull#189 M-15. Can you tell me which portapotty fits in that space? It seems VERY short if I want to place the plywood and cushion back over the portapotty. Thanks for making a very sturdy little boat. I am still "dry sailing"....it's great! ----Larry H. Sacramento
__________________________________ Do you Yahoo!? Vote for the stars of Yahoo!'s next ad campaign! http://advision.webevents.yahoo.com/yahoo/votelifeengine/ _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats