Thanks for the info, Gary. —Steve on Whidbey On Nov 9, 2009, at 5:06 PM, Gary M Hyde wrote:
I used stainless ones with a twist-lock feature. The size was pretty common, but don't know what. Boat is in storage at present, so can't find out or photograph.
--Gary Hyde 2005 M17 #637 sailboat 'Hydeaway 2' & Bolger Nymph
On Nov 9, 2009, at 12:54 PM, steve pearse wrote:
Do you recommend a particular brand/style/size of hasps, Gary? Recommended lock design/specific product?
—Steve on Whidbey
M-15 hull #163
On Nov 9, 2009, at 12:33 PM, Gary M Hyde wrote:
I put hasps on mine using short screws. --Gary ☺
On Nov 8, 2009, at 9:06 AM, Joe Murphy wrote:
I thought I had the solution for securing the lockers on my M17. However, what I find is that there is very little clearance to secure any hardware on the lid. Any suggestions and/or suppliers. Thanks folks, Joe Seafrog M17 #651
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/ montgomery_boats
Remember, there is no privacy on the Internet!
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/ montgomery_boats
Remember, there is no privacy on the Internet!
Steve Pearse sspearse@whidbey.com
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
Steve Pearse sspearse@whidbey.com