If you take the teak off the boat it will be a LOT easier to deal with. Most old teak needs to be rebedded anyway. Don't know what happened to my email about "New Glass 2" but that is what I used and it was very easy to get a magnificent, long lasting shine! I don't sell the stuff but I certainly will use it again when that becomes necessary. On Mon, May 1, 2017 at 10:46 AM, STANLEY WHEATLEY <swwheatley@comcast.net> wrote:
Best way to strip an old finish is a heat gun and a good scraper like a Bahco/Sandvik.
On May 1, 2017 at 12:49 AM Daniel Rich <danielgrich@gmail.com>
wrote:
I will check that out.
The teak has something on it like Cetol. Peeling off. So, I think I
need some sort of mechanical removal of it. Maybe I will just have to sand it.
Daniel
> >
On Apr 30, 2017, at 9:28 PM, Bob Eeg <
montgomeryboats@hotmail.com> wrote:
Not a fan of a sponge try to get a rotating rug. Held on with
Velcro.
userportal/show_product.do?pid=9118
Sent from my iPad
On Apr 30, 2017, at 9:24 PM, Daniel Rich <
danielgrich@gmail.com<mailto:danielgrich@gmail.com>> wrote:
This is good to know. My Monty needs some TLC.
Now, what about the teak? A total mess. Should I scrape with a
cabinet scraper?
Daniel On Apr 30, 2017, at 9:23 PM, Bob Eeg <
montgomeryboats@hotmail.com<mailto:montgomeryboats@hotmail.com>> wrote:
Also get an old windex to mist some water on the compound. Do
a large section at a time. It cuts fast and doesn't take long.
Sent from my iPad
On Apr 30, 2017, at 9:17 PM, Daniel Rich <
danielgrich@gmail.com<mailto:danielgrich@gmail.com>> wrote:
Thanks for the quick response Bob!
OK, I will check them out. Can I get away with a buffing pad
on my portable drill, or do I need an edge grinder or something else?
Daniel On Apr 30, 2017, at 9:15 PM, Bob Eeg <
montgomeryboats@hotmail.com<mailto:montgomeryboats@hotmail.com>> wrote:
Daniel
I like these 2 products that we use.
(google)
Aqua Buff 1000. (Cutting) Aqua Buff 2000 (finishing)
Yes a machine . In the final stage we add some yellow wax to the Aqua Buff
2000 to shine
It up like new
Be well Bob
Sent from my iPad
On Apr 30, 2017, at 8:59 PM, Daniel Rich <
danielgrich@gmail.com<mailto:danielgrich@gmail.com>> wrote:
Montypals:
Man, my Monty has lots of oxidation. It has been neglected
while I build my SCAMP.
So, I want to rub out the hull, but I have never done it.
Should I do it by hand, or use some kind of buffing machine? I think the laps will get in the way. Thoughts?
Daniel Rich M15 #208 "Kestrel" danielgrich@gmail.com<mailto:danielgrich@gmail.com>
>