To keep this off line, drop me an email at seagray@embarqmail.com and leave me a ph number. Regards, Joe SeaFrog ----- Original Message ----- From: Gary Valetti To: For and about Montgomery Sailboats Sent: Friday, April 20, 2012 9:08 PM Subject: Re: M_Boats: clevis pins Have not received any info yet. So if you can help out I would appreciate it Tkx Gary On Apr 20, 2012 5:17 PM, "Joe Murphy" <seagray@embarqmail.com> wrote:
Gary, Have you gotten the answers to these ?'s yet. If not, I have my mast down right now (shortening the backstay) so I have access to all the pins. My M17 is a 2008. Joe SeaFrog M17 #651 ----- Original Message ----- From: tommyval@aol.com To: montgomery_boats@mailman.xmission.com Sent: Tuesday, April 17, 2012 6:13 PM Subject: M_Boats: clevis pins
I'm in the process of replacing the standing rigging and I need to purchase new clevis pins. Unfortunately I left the old ones on the boat which is 100 miles away so I am requesting your help again. I am going from memory.
M17
4 masthead pins each 1/4 by 1 5/8 length 2 upper shrouds at the masthead ? 2 lower shrouds at the spreaders ? 1 forestay ? by 5/8 length 1 backstay ? by 5/8 length 3 pins for the split backstay ? by 5/8 length 4 chainplate pins ? by 5/8 length 2 pins at deck level for the backstay ?
Is this correct? What am I leaving out? Are the listed sizes correct ? What are the ? sizes?
Thanks again for your help
Gary M17