Peter, I use a real low tech tiller lock on my M15. Uses a jam cleat on the bottom of the tiller to capture a line connected to two bungee loops that connect to the stern cleats on either side. Works real well. Email me off line if you want to know more. t Tom Smith & Jane Van Winkle Sandpoint, Idaho M15-345, Chukar M17-064, Unnamed -----Original Message----- From: Peter Deffenbacher [mailto:pwdeffen@easystreet.com] Sent: Tuesday, February 03, 2004 11:25 PM To: montgomery_boats@mailman.xmission.com Subject: M_Boats: M15 Jib, Main and Tiller Lock Thank you, Tom S, Steve R, Bill R, Randy G. I think that on my boat I will start with the tiller lock because I have been there with a 20 MPH wind blowing and trying to set the sails with the tiller loose! The rudder will go the wrong way! I am thinking that a Tiller Lock from WM would be the best to start with. Does anyone have any more advice? Thanks in advance, Peter D Peanut M15 _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats This message was scanned for viruses!!