The rudder blade is held down by cinching up and cleating off the line on the front of the rudder. On impact, the cleat releases and allows the blade to pivot on the bolt. You then just tighten that line back up to pull the blade back down, cleat it, on you're on your way. Larry On Thu, 3 Mar 2005 07:11:55 -0600 "Gilbert Landin" <gilbert@mindgame.com> writes:
Randys pictures sure look good. It just seems the one tension bolt would make it hard for the bottom part to stay horizontal on a good sail.
gil ----- Original Message ----- From: "Larry E Yake" <leyake@juno.com> To: <montgomery_boats@mailman.xmission.com> Sent: Wednesday, March 02, 2005 11:20 PM Subject: M_Boats: M17 Kick-up rudder
My new kick-up rudder from Ida Sailor arrived this week. I'm impressed. It fits perfect and the workmanship is top notch. Can't wait for spring to try it out. All I have to do is drill the tiller pivot bolt hole, since I'm using my old tiller. Randy Graves added some pictures of it to his website at http://sailing.gravesfam.us . It has some custom modifications to fit my non-standard gudgeons, and I had the optional releasing jam cleat added, but the basic design will be the same for the standard M17 setup.
Larry Yake M17 #200 Tullamore "In a power boat you get there faster. In a sailboat you're already there."
_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats