Dave, and RustyThanks for the quick response and photo. Yes, my shroud adjusters are same as in your photo. I've attempted nothing sophisticated to tension. I like to see just a little noticeable slack in the leeward shroud when the boat heels in a moderate wind. Presently, lots of slack but I thought not enough to go to the next hole. Wanted to check the wisdom of the group before trying to tighten.Thanks againMike WM15 #139 On Saturday, September 2, 2023 at 12:05:17 PM PDT, Dave Scobie <scoobscobie@gmail.com> wrote: Shroud adjusters, see picture, are stock and how Jerry delivered all his M15s. Turnbuckles result in an over-tensioned rig. I discuss in detail how to adjust the M15, including rake, in the Facebook MSOG group. Are you a member? How are you determining rig tension? :: Dave Scobie :: M6'8" #650 :: Baba 30 #233 DEJA VU :: former owner SV SWALLOW - sailboatswallow.wordpress.com/ :: former owner M17 #375 SWEET PEA - m17-375.com :: former owner M15 #288 SCRED - m15namedscred.wordpress.com On Sat, Sep 2, 2023, 11:42 mike witkin via montgomery_boats < montgomery_boats@mailman.xmission.com> wrote:
My 1981 M15 has turnbuckles that look like parts from an Erector set. (A series of 12 holes for inserting the clevis pins) None of the settings result in appropriate shroud tension. Is there another type of tension device M15 owners are using? I am unable to find a jaw-to-jaw turnbuckle short enough to do the job. Appreciate your help. Mike W M15 #139