Dave Thanks for the warning will keep an eye on things. I agree regarding the set up but could not get the Furler to connect directly to the stem head so had to use a shackle on both ends. Would the Furler fit the STM-1 directly? George "We Can Not Control the Wind But We Can Adjust Our Sails" On Fri, Aug 19, 2016 at 8:12 PM, Dave Scobie <scoobscobie@gmail.com> wrote:
George:
the worry is all those shackles are not strong enough ... and based on the sailing you have done they may be! just keep an eye on them as that isn't a standard setup for a furler.
Jerry's boat had something along the lines of a Garhauer STM-1 -
https://garhauermarine.com/catalog_process.cfm?cid=64
:: Dave Scobie :: former M15 owner #288 - http://www.freewebs.com/m15-name-scred :: M17 #375 SWEET PEA - http://www.m17-375.webs.com :: Sage 17 #1 - AIR BORN - http://sagemarine.us/sage_17.html :: Sage 15 sloop #001 - ASOLARE - http://sagemarine.us/sage_15.html :: SageCat #000 - SAGECAT - http://sagemarine.us/sagecat.html
On Fri, Aug 19, 2016 at 6:29 PM, George Iemmolo <griemmolo2@gmail.com> wrote:
Dave
Is to your concern with the working load of the pad eye or the shackle? What do you have for a stem-head fitting on your M15?
Have been sailing with this pad-eye fitting since I purchased the boat 4 years ago, shackle is the same one that held my fore stay.. First season with the Harken roller furller. Been out in steady 20 K 30 K gusting winds with a double reef in the Main when I had a hank on jib. Most my Furller has seen is steady 15 k this season.
George "We Can Not Control the Wind But We Can Adjust Our Sails"
On Fri, Aug 19, 2016 at 5:20 PM, Dave Scobie <scoobscobie@gmail.com> wrote:
sorry for typo ... HARKEN 688 padeye :-)
:: Dave Scobie :: former M15 owner #288 - http://www.freewebs.com/m15-name-scred :: M17 #375 SWEET PEA - http://www.m17-375.webs.com :: Sage 17 #1 - AIR BORN - http://sagemarine.us/sage_17.html :: Sage 15 sloop #001 - ASOLARE - http://sagemarine.us/sage_15.html :: SageCat #000 - SAGECAT - http://sagemarine.us/sagecat.html
On Fri, Aug 19, 2016 at 4:14 PM, Dave Scobie <scoobscobie@gmail.com> wrote:
looks like a Harkent 638 padeye. cast fitting. working loads are: vertical = 3800#, 45deg = 5000# and horizontal 4800#.
my concern with your setup George is all the shackles .. .especially the one under the drum attaching to the padeye.
:: Dave Scobie :: former M15 owner #288 - http://www.freewebs.com/m15-name-scred :: M17 #375 SWEET PEA - http://www.m17-375.webs.com :: Sage 17 #1 - AIR BORN - http://sagemarine.us/sage_17.html :: Sage 15 sloop #001 - ASOLARE - http://sagemarine.us/sage_15.html :: SageCat #000 - SAGECAT - http://sagemarine.us/sagecat.html
On Fri, Aug 19, 2016 at 4:08 PM, GILASAILR--- via montgomery_boats < montgomery_boats@mailman.xmission.com> wrote:
Is your bow chainplate a forged fitting? I would not recommend a cast fitting at this location.
Have Fun - Go Sailing! GO
In a message dated 8/19/2016 9:43:17 A.M. US Mountain Standard Time, griemmolo2@gmail.com writes:
We have had some rain here lately so I am a little late with the pics