Bert, it would be great to receive those installation photos for installing a ladder on the M-15. Thanks much in advance for doing so! —Steve (hull #163) sspearse@whidbey.com On Nov 25, 2009, at 1:41 PM, flickasf@aol.com wrote:
1. The stern pulpit was custom made by Svendsen's Metal Shop in Alameda,CA.
2. I have had no flexing from my life line stanchions on either of my M 15s. The first M 15, Kokopelli was sailed in heavy weather for several years on San Francisco Bay. They do have stainless backing plates which are a mirror image to the stanchion bases.
3. I recommend the four step telescoping ladder from Windline. It makes it easier to get out of the water. You can order directly from the factory. It's the same one used on the Potter 19. The factory had the best price.
4. To install the pulpit and ladder I put in three four inch Becksen inspection ports, 2 aft and one on the starboard side beneath the forward leg of the pulpit. The stern pulpit was fairly easy and should be done first so you have more room to work.
5. I premade and drilled a backing plate for the ladder and drilled the holes in the stern as well. After treating the stern with penetrating epoxy, I fished a string through one of the holes in the stern and ran it through the backing plate in the cabin. I ran it through a washer and tied it. Then I simply pulled it to the stern. Once the first bolt was in place, the rest was fairly easy. Be sure to have extra nuts and washers.
If anyone needs photos of the projects, send me your email and I will send them to you within a couple of weeks.
Bert M 15, Zephyr
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
Steve Pearse sspearse@whidbey.com