Montypals: I am doing some re-rigging of M15 Kestrel. Just received my sails from JudyB and Hyde a few weeks ago. Sadly, the jib is too big! So, it is being remade. Just one of those things. In any event, I am going to set up a 3-1 outhaul per a previous photo supplied by one of you guys. Looks good. But I am grappling with the best way to set up a better downhaul. My current setup is a 2-1 going only through the cunningham. Basically there is an eyestrap on one side of the mast, and the line goes from there up through the cringle, and then down to a jam cleat. Not a very nice setup, and the thing is too high anyway so the purchase is not good. I want to get perhaps 4-1, but don’t want to lead it aft. I am just having a hard time visualizing the thing. A cascading system would work I think, but I just have a hard time understanding the geometry. Furthermore, easy rigging and derigging is a must. I want to use the downhaul instead, since there is a ring on my floating gooseneck for that purpose, and that should work as well or better than the cunningham. I will mount much lower on the mast. Any ideas here?? -- Daniel Rich M15 #208 "Kestrel"