Well how fun...I'm in Goshen, IN this week for work, about 1.5 hrs. east of you. I can probably see your garage from the flight home via Chicago from South Bend Saturday... ;-). cheers, John S. On 03/02/2016 03:25 PM, George Iemmolo wrote:
Jazz
She (Merry Helen II) is stored in the garage right now waiting for the weather to warm up here in Valparaiso in North West Indiana 50 mi East of Chicago. Snow storm scheduled for tonight and tomorrow.. Will get a video to share after launch in May.
George "We Can Not Control the Wind But We Can Adjust Our Sails"
On Tue, Mar 1, 2016 at 10:48 PM, Jazzy <jazzydaze@gmail.com> wrote:
I see a beautiful Monty! Send a video tour!
Jazz On Mar 1, 2016 1:51 PM, "George Iemmolo" <griemmolo2@gmail.com> wrote:
Here is my attempt at sharing a picture from my Monty folder in Dropbox. I still can not see how to share a folder will continue to explore.
George "We Can Not Control the Wind But We Can Adjust Our Sails"
On Tue, Mar 1, 2016 at 2:01 PM, Thomas Buzzi <thomaspbuzzi@gmail.com> wrote:
Thanks for the feedback, George. There were far too many choices on all the screens to blunder into the right way to do anything. With my absence of short term memory it was pretty well useless for me to persist. Once I got to where I wanted to go I didn't remember how I got there. Guess I will stick to forwarding pics through the email to other people's emails and bypassing the Monty site. Tom B
On Tue, Mar 1, 2016 at 11:46 AM, George Iemmolo <griemmolo2@gmail.com> wrote:
Thomas
Your link opened up my Dropbox with all its files. To the left there was a share link that indicates the ability to make any file available to others to view or add pics. I opened my Montgomery folder and it has a share button at the right top. Still have not figured out how to make it available to the group
George "We Can Not Control the Wind But We Can Adjust Our Sails"
On Mon, Feb 29, 2016 at 4:57 PM, Thomas Buzzi < thomaspbuzzi@gmail.com> wrote:
:// www.dropbox.com/home?preview=flooding%2C+boat+rigging+010.JPGHey, Jazz, Downloaded Dropbox today. Have been fiddling with it since. Have gone through my pics and put a bunch in my Dropbox but still not sure how to share them. Well, that's the first attempt. Should show a garage roof shot of the Monty.
This email has been sent from a virus-free computer protected by Avast. www.avast.com <
https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaig...
> <#DDB4FAA8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
On Mon, Feb 29, 2016 at 9:36 AM, Jazzy <jazzydaze@gmail.com> wrote:
> Tom did you ever get dropbox going? I'd love to see pictures of your boat > details. We should have a boat tour from everyone! I've never even seen > another Monty. Not only that, this is the first "real" sailboat I've ever > had a chance to look at so closely so I'm sort of like the blind man > inspecting an elephant. > > It has been raining everyday and very still here so I'm just waiting for a > good day to go when all the stars align. I know El Nino is totally ready > to go, just details now. > > Jazzy > On Feb 29, 2016 5:40 AM, "Thomas Buzzi" <thomaspbuzzi@gmail.com> wrote: > >> A word of advice, don't wait until the list is done to go sailing. It > never >> will be done, you will never go sailingš©. >> I looked at your image again and it also reminded me of some sort of >> tabernacle for a very large mast. The wooden mast wound have to have a >> cross tang to catch the uprights on your deck post though or it would > just >> swing through and land on your car roof. Also the position would be for a >> cat rig. An interesting contraption. Maybe there is a maker stamp on the >> bottom of it that would point to its original intended use. Perhaps it > has >> nothing to do with sailing and some shade tree tinkerer thought it would >> repurpose just right where it is. >> "Curiouser and curiouser", said Alice. >> >> This email has been sent from a virus-free computer protected by Avast. >> www.avast.com >> < >> >
https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaig...
>>> >> <#DDB4FAA8-2DD7-40BB-A1B8-4E2AA1F9FDF2> >> >> On Sun, Feb 28, 2016 at 11:57 PM, Jazzy <jazzydaze@gmail.com> wrote: >> >>> Thanks, added to the to do list..damn that list is long! >>> >>> Jazz >>> On Feb 28, 2016 8:25 PM, "Thomas Buzzi" < thomaspbuzzi@gmail.com> > wrote: >>> >>>> Jazz, >>>> Pull off the existing samson post and check the bolt holes against >> those >>> of >>>> a 6 inch hershoff deck cleat aimed fore and aft. If the holes are >> widely >>>> separated use the standard drill out and fill with epoxy trick. If > the >>>> cleat holes are close to the existing holes you may be able to reuse >> the >>>> holes and not have to drill new ones. I have some 1/8 inch ss plate > so >>>> would make two identical plates one for inside, one for outside and >> drill >>>> holes to match the existing. I would then bolt the cleat to the top >>> plate. >>>> No new holes, nice big pads top and bottom to spread the load on a >> balsa >>>> cored deck. >>>> Have fun. >>>> Tom B >>>> >>>> This email has been sent from a virus-free computer protected by > Avast. >>>> www.avast.com >>>> < >>>> >>> >> >
https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaig...
>>>>> >>>> <#DDB4FAA8-2DD7-40BB-A1B8-4E2AA1F9FDF2> >>>> >>>> On Sun, Feb 28, 2016 at 9:25 PM, Jazzy < jazzydaze@gmail.com> wrote: >>>> >>>>> Ok got it. Is it oriented bow to stern, or side to side? I still >> have >>>> the >>>>> original cleats aft, they seem to be aluminum and are silver. I'm >>>>> wondering about plugging the holes from the current setup. Is > that a >>> 3m >>>>> job or will I be fiberglassing painting etc...? >>>>> On Feb 28, 2016 6:47 PM, "Stanley Wheatley" < > swwheatley@comcast.net> >>>>> wrote: >>>>> >>>>>> The original bow cleat was a 4-5" black anodized aluminum horn >> cleat, >>>>> same >>>>>> as what might still be on your boat's stern quarters. I replaced >>> mine >>>>> with >>>>>> the 6" version of the following (I'm partial to Suncor because > they >>> are >>>>>> local to me): >>>>>> >>>>>> http://www.suncorstainless.com/herreshoff-cleat >>>>>> >>>>>> Note that they also sell ready made backing plates. You might be >>> able >>>> to >>>>>> justify an 8" bow cleat on an M17. Anything larger than that > would >>> be >>>>> way >>>>>> too big. >>>>>> >>>>>> -----Original Message----- From: Jazzy >>>>>> Sent: Sunday, February 28, 2016 8:48 PM >>>>>> To: GILASAILR@aol.com ; For and about Montgomery Sailboats >>>>>> Subject: Re: M_Boats: Anchor deck hardware.. >>>>>> >>>>>> What's it supposed to look like? >>>>>> >>>>>> Pardon my ignorance and 10000 questions >>>>>> Jazz >>>>>> On Feb 28, 2016 5:16 PM, "GILASAILR--- via montgomery_boats" < >>>>>> montgomery_boats@mailman.xmission.com> wrote: >>>>>> >>>>>> Jazz, Best for the boat and your shins would be to remove it and >>>> replace >>>>>>> with correct cleat (fasteners are undersized at current install) >>>>> potential >>>>>>> for SERIOUS deck damage if heavily loaded. >>>>>>> Have Fun Go sailing. >>>>>>> GO >>>>>>> >>>>>>> >>>>>>> In a message dated 2/28/2016 6:12:03 P.M. US Mountain Standard >> Time, >>>>>>> jazzydaze@gmail.com writes: >>>>>>> >>>>>>> Hmmmm...Smit Bracket. Similar. .. >>>>>>> >>>>>>> Jazz >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>> >>> >> >
-- John Schinnerer - M.A., Whole Systems Design -------------------------------------------- - Eco-Living - Whole Systems Design Services People - Place - Learning - Integration john@eco-living.net - 510.982.1334 http://eco-living.net http://sociocracyconsulting.com