Tom, Makin' Time is a 2005 #622. I looked at opening up the groove in the aluminum sheaves, but they seemed a bit rough in the bore, so went with new. Wish they could be a larger diameter, but that won't work in the mast head casting. Regards, Bill On Thu, Jun 3, 2010 at 12:53 PM, Tom Jenkins <tjenk@gte.net> wrote:
Bill, Would you tell us what era of 17 you have? It is probably an issue in sheave size. Thanks, Tom Jenkins M17 Scintilla
On Jun 3, 2010, at 9:11 AM, Bill Wickett wrote:
Hi Andrei,
Re: the sheaves for rope halyards.
I ordered 4 from http://zephyrwerks.com/. Very good service, easy to deal with, great quality product.
I sized them for 8mm (5/16") line. May still go with smaller OD line. We had a discussion on the list back in January re weight aloft.
1.25" x .375" x .25" for 8mm line. I used my existing pins. Fit is very good. Less play than the original aluminum sheaves that the wire ran in.
Regards,
Bill
On Thu, Jun 3, 2010 at 11:18 AM, Andrei Caldararu <andreic@math.wisc.edu
wrote:
Hi fellow Monty sailors,
I need to attach two cam cleats on the mast of my M-17 for the halyards. It is an arrangement I had on a previous Compac 16 and I liked it a lot -- it consists of two integrated block+cam cleat attached to the mast, and to raise the sail you just pull on the halyard, no need to cleat it off, the cam holds it there.
In any case, my question is what do people use to attach stuff to the mast; I have heard of stainless steel screws+loctite+some compound (don't remember the name) to prevent corrosion; or aluminum rivets. Are the rivets holding up as well as the screws? They sound easier to put in than screws, no corrosion issues, etc., but I am worried about their holding strength.
A second question is related to the sheaves at the top of the mast. At the moment I have wire-to-rope halyards, but I am going to install new all-rope halyards. Do I need to replace the sheaves with ones with a more rounded groove? Where does one buy new ones if I do need to replace them?
Thanks for all opinions.
Andrei.
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!