Hi Blake, Another way to go, one which I will likely do on my M 15, is to get a Brunton Nexus 70UNE. It is a combination hand held bearing compass and steering compass. It has a cylindrical shaft ( like a flashlight ) which can be slid into a bracket, which, in turn, can be screwed into the underside of the teak board at the companionway or onto the sliding companionway cover. The bracket can be mounted horizontally or vertically, and the compass will operate properly either way. Also, you can buy a second bracket so that you can mount the compass in two different parts of the boat, depending on conditions. It isn't cheap, however, so if price is important, the advice to simply mount a compass on a separate board sounds good. Regards, Ron C. --- chbenneck@juno.com wrote:
Hi Blake,
When I had our M15, I had a small Danforth compass mounted on a piece of teak board.
I just placed it on the cockpit sole at the front end of the cockpit. The bulkhead supplied a reference point, and if the compass was moved (by feet) it was instantly visible as a gap between teak board and bulkhead, so alignment was no problem.
The advantage, as far as I was concerned was:
1. The compass was easy to stow when not in use.
2. I didn't have to mount it in the aft end of the cabin. Mounting it there means that on one tack it is handy to see, on the other you are craning your neck.
3. Fewer holes to make in the M15.
Connie
ex M15 #400 LEPPO
_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
____________________________________________________________________________________ Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games. http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow