I always mount accouterments on the bow pulpit "inside" the rails instead of projecting on the "outside" where they can snag lines, etc. Fair winds, Tom Buzzi On Tue, Jun 19, 2018 at 7:45 AM, Dave Scobie <scoobscobie@gmail.com> wrote:
Catalina Direct sells a mount that you can bolt on to the pulpit to hold an Aqua Signal series 25 bi-color light -
https://www.catalinadirect.com/index.cfm/product/3707/ navigation-light-bracket-ss-clamp-on.cfm
:: Dave Scobie :: M17 #375 SWEET PEA - m17-375.com
On Tue, Jun 19, 2018, 12:35 AM Lawrence Winiarski via montgomery_boats < montgomery_boats@mailman.xmission.com> wrote:
If you get the pulpit, I might suggest getting it ready for wiring for a bow light before installing it. A bow lighton the pulpit is nicer than a deck mount as the jib is in the way.
It would be nice to have a little square piece of metal at the top of the pulpit welded, ready to attach a bow light, with anhole for the bow light wiring to go into the pulpit, along with drilling an entrance hole in the bottom, so the wires can be fully inside the pulpit and run from the cabin up through the railing. Easier to do now, rather than later.
From: "jerry@jerrymontgomery.org" <jerry@jerrymontgomery.org> To: For and about Montgomery Sailboats < montgomery_boats@mailman.xmission.com> Sent: Monday, June 18, 2018 11:11 PM Subject: Re: M_Boats: Bow pulpit. My boat did not come with a bow
pulpit.
Is there any resource for getting one made or used.
Try Railmakers in Costa mesa, CA- That's who I bought them from.
On 06/18/2018 08:21 PM, Doug wrote:
New member here from Bend, OR. just bought a Montgomery 15.