Thanks Dave! That is a great write up. The rubbed Teak I did required wet sanding with 400 grit and 600 grit. If you put on maintenance coats do they need to be wet sanded as well? Thanks Robbin Robbin Roddewig robbin.roddewig@verizon.net -----Original Message----- From: Dave Scobie <scoobscobie@gmail.com> To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Sent: Sun, Jul 16, 2017 7:18 pm Subject: Re: M_Boats: rubbed oil finish on teak rubbed teak oil is what i use on my boats. also used on the Sage boats. works great and much easier to maintain in my opinion (i know others will disagree). i discuss teak oil finishing here - https://sagemarineblog.wordpress.com/2014/12/21/wood-finishes/ :: Dave Scobie :: former M15 owner #288 - http://www.freewebs.com/m15-name-scred :: M17 #375 SWEET PEA - http://www.m17-375.webs.com :: Sage 17 #1 - AIR BORN - http://sagemarine.us/sage_17.html :: Sage 15 sloop #001 - ASOLARE - http://sagemarine.us/sage_15.html :: SageCat #000 - SAGECAT - http://sagemarine.us/sagecat.html :: SageCat #002 - LYNX - http://sagemarine.us/sagecat.html On Sun, Jul 16, 2017 at 4:37 PM, Robbin Roddewig < robbin.roddewig@verizon.net> wrote:
Hi all, not as exciting as major rebuild stuff but I just did my first rubbed oil finish on a teak drawer. Has anyone got experience with this? I was going from a couple of books and wonder if I pulled off the desired finish.
Thanks Robbin
Robbin Roddewig robbin.roddewig@verizon.net M-23 Pinch Me , Marshall 22 Otter