I got a Panasonic Camera to take pictures of the new board and the other adds and I am told that with my Adobe 7 Photoshop I should be able to move any picture or format back and forth to other formats. I ended up raising the trailer up with a floor jack inch at a time on each side, sliding one by two under the trailer frame, going side by side and using the trailer screw jack in front to keep the whole thing level. Building a 2 x 6 support under the boat and with the help of a few cinder blocks let the trailer down and suspended the boat in the sir. I had to raise the boat off the trailer 26 and 1/2 inches of the garage floor to get the board out of the slot. So far there is only two things I do not like. For one, that really heavy centerboard, lighter would nicer. And the lack of access to under the cockpit and cabin floor. I have just put together a model for my next project, a fold away navigation center that folds down when needed. I need to sail more and work less.