Did you get your plywood? If not, what dimensions do you need? Does it have to be 1' x 2' or will modest sized scraps work? As in "If it fits it ships" sized scraps? 1/4" occume or marine fir On Mar 22, 2011, at 11:36 AM, W David Scobie wrote:
seattle area Mboaters:
what i'm needing is two sq. ft. of 1/4 to 3/8 marine plywood. the challenge is buying such a small amount as all i've been able to find are places willing to sell me a full sheet.
i'm going to be re-bedding the motor mount on my M17, SWEET PEA. the owner, before the owner before me moved the mount from the port to the starboard side and in doing this didn't install backing to unsupported, starboard, side of the transom.
i am also going to install a boarding ladder to the port side of the transom.
anyone have some marine plywood i could purchase a couple sq. ft.?
:: dave scobie :: M17 #375 SWEET PEA - www.m17-375.webs.com :: Sage Marine - www.sagemarine.us
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
When posting, remember that there is no privacy on the Internet!