Todd: yeah ... you need to get that keel just down to the bunk. pictures attached showing the Glesser's M23sc on her trailer. one shows the keel. the other two pictures show the 'gaps' between the bunk and the hull forward and aft. if you need other assistance on the bunk/hull orientation let me know as the Glesser's M23sc is here at the shop so easily accessible. :: Dave Scobie ________________________________ From: Todd Bradley <todd@btbuilders.net> Sent: Tuesday, August 13, 2013 5:15 PM Sean, I am hoping you can provide some input here. I had Pacific Trailer build a trailer for my 23' using the template they had and I believe the one they used for your boat. When we went to set the boat on the trailer, the keel is about 4" from setting into the keel slot/cradle (see attached pictures). Looks like we will need to unbolt the posts that support the bunks and drill additional holes so we can lower the bunks further. I know you had to make some adjustments to the rear bunks but just curious if you ran into this? It is my understanding that a good portion of the weight should be resting on the keel? Thanks, Todd Bradley M-23 Ce Cee #86
