- montgomery_boats - mailman.xmission.com

Re: M_Boats: 2013 WrinkleBoat Intergalactic Championship Regatta & Ran-Tan
by GILASAILR＠aol.com 27 Sep '12

27 Sep '12

Advice well taken - will try and save an audio file and put it up after the event! Take Care,Have Fun,You come out - we'll get you a position as crew! GO

1 0

M-15
by jerry montgomery 27 Sep '12

27 Sep '12

I just returned from the Sac State Aquatioc Center, where I looked at an early M-15. It was donated to them and is a steal at 2,500. incl trailer. We tapped it down for dry-rot (none) and played with the cb, which operated slicker than snot on a hot doorknob. It's sunburned but a day's work with a good buffer would do wonders. If interested email Gary Cook at gcook(a)saclink.csus.edu I don't think it will stick around long- if I didn't have a Sage I'd grab it. jerry -- I am using the free version of SPAMfighter. SPAMfighter has removed 7214 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len Do you have a slow PC? Try Free scan http://www.spamfighter.com/SLOW-PCfighter?cid=sigen

2 1

Re: M_Boats: Pine Tar removal
by Stan Susman 26 Sep '12

26 Sep '12

I've had very good luck with good old WD40 . My luck is enhance by the fact that there's a can living in my tool bag. Go figure Stan -----Original Message----- From: Joe Murphy Sent: Wednesday, September 26, 2012 9:12 AM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Pine Tar removal Valerie, Try Castrol Super Clean. You can find it in any auto supply store. It can be used on fiberglass and I found that it didn't harm the gelcoat. It comes in a 4oz spray bottle. Spray it on and leave it on for a minute or two and wipe off with a very very soggy-wet terry cloth and then hose down well. Have some premixed Boat wash in a bucket to folllow up to remove any of the residue from the Super Clean. It was also the fastest thing I've used to remove the sticky adhesive left when taping off the boat for painting. Good luck, Joe SeaFrog M17 ----- Original Message ----- From: V Gates To: montgomery_boats(a)mailman.xmission.com Sent: Tuesday, September 25, 2012 11:26 PM Subject: M_Boats: Pine Tar removal We just returned from Loon Lake in the Sierra and our M 15 has a few small spots of pine tar. Is goof off safe to use on the fiberglass? Should one avoid the wood trim? Today we cleaned and waxed it and want to add the finishing touches. Also we noted the post about the M 15 for sale at Sacramento State Univ Aquatic Center. That is where we learned to sail. Valerie Gates Mistral

1 0

Re: M_Boats: Anchoring
by leyake＠juno.com 26 Sep '12

26 Sep '12

Haven't had much crud on the rode where I sail. Sometimes the anchor will bring up a scoop of mud but that comes off with a few dunks over the side. Glad we don't have the crud that some of you guys have to deal with. ---------- Original Message ---------- From: James Poulakis <picfo(a)comcast.net> To: For and about Montgomery Sailboats <montgomery_boats(a)mailman.xmission.com> Subject: Re: M_Boats: Anchoring Date: Wed, 26 Sep 2012 12:27:06 -0700 ... and what do you do about the crud that comes up with the rode? Jim M-17 "Spirit" On Sep 26, 2012, at 9:00 AM, Joe Murphy wrote: > Larry, > Where on the bow pulpit do you attach the snatchblock? I gather you're not concerned with the stress of the anchor line on the pulpit? > Thanks, > Joe > SeaFrog M17 > ----- Original Message ----- > From: bownez(a)juno.com > To: montgomery_boats(a)mailman.xmission.com > Sent: Wednesday, September 26, 2012 9:06 AM > Subject: Re: M_Boats: Anchoring > > > Hiya Larry, > > I liked your input on anchoring > Looks like I'll be buying a snatch block for my M17...... > > I can also testify that outboard motors with alternators will only supply ample current when they are running at higher RPM. The output voltage is also unregulated. > > Bones > > ____________________________________________________________ > Woman is 53 But Looks 25 > Mom reveals 1 simple wrinkle trick that has angered doctors... > http://thirdpartyoffers.juno.com/TGL3141/5062fe0a4407c7e094b9dst02vuc >

4 3

Re: M_Boats: Anchoring
by leyake＠juno.com 26 Sep '12

26 Sep '12

Primary anchor is a Manson Supreme. About 11 lbs, I believe. Secondary anchor is a Lewmar Claw, also 11 lbs. ---------- Original Message ---------- From: Bill Wickett <billwick(a)gmail.com> To: For and about Montgomery Sailboats <montgomery_boats(a)mailman.xmission.com> Subject: Re: M_Boats: Anchoring Date: Wed, 26 Sep 2012 17:33:29 -0400 Larry,what is the weight of your anchor? On 9/26/12, Larry E Yake <leyake(a)juno.com> wrote: > My bow pulpit has a loop on each side for lifeline attachment. I hang the > snatch block on the port side. Provides a straight line from there to the > winch and also holds the chain away from the hull if you need to motor a > little ways before bringing it the rest of the way in. This method also > works great if you need to relocate your anchor. Just bring it up to the > snatch block, position the boat, and let her back down. Regarding stress > on the bow pulpit, I don't leave the line up there when anchored, only > when raising the anchor. I installed that bow pulpit myself and I know > how solid it is. There is enough give with the bow able to sink a ways if > the load gets too heavy. Use reasonable caution, of course. > > Larry > > On Wed, 26 Sep 2012 12:00:56 -0400 "Joe Murphy" <seagray(a)embarqmail.com> > writes: >> Larry, >> Where on the bow pulpit do you attach the snatchblock? I gather >> you're not concerned with the stress of the anchor line on the >> pulpit? >> Thanks, >> Joe >> SeaFrog M17 >> ----- Original Message ----- >> From: bownez(a)juno.com >> To: montgomery_boats(a)mailman.xmission.com >> Sent: Wednesday, September 26, 2012 9:06 AM >> Subject: Re: M_Boats: Anchoring >> >> >> Hiya Larry, >> >> I liked your input on anchoring >> Looks like I'll be buying a snatch block for my M17...... >> >> I can also testify that outboard motors with alternators will only >> supply ample current when they are running at higher RPM. The output >> voltage is also unregulated. >> >> Bones >> >> ____________________________________________________________ >> Woman is 53 But Looks 25 >> Mom reveals 1 simple wrinkle trick that has angered doctors... >> >> http://thirdpartyoffers.juno.com/TGL3141/5062fe0a4407c7e094b9dst02vuc >> >> >> > >

1 0

Re: M_Boats: Anchoring
by Larry E Yake 26 Sep '12

26 Sep '12

My bow pulpit has a loop on each side for lifeline attachment. I hang the snatch block on the port side. Provides a straight line from there to the winch and also holds the chain away from the hull if you need to motor a little ways before bringing it the rest of the way in. This method also works great if you need to relocate your anchor. Just bring it up to the snatch block, position the boat, and let her back down. Regarding stress on the bow pulpit, I don't leave the line up there when anchored, only when raising the anchor. I installed that bow pulpit myself and I know how solid it is. There is enough give with the bow able to sink a ways if the load gets too heavy. Use reasonable caution, of course. Larry On Wed, 26 Sep 2012 12:00:56 -0400 "Joe Murphy" <seagray(a)embarqmail.com> writes: > Larry, > Where on the bow pulpit do you attach the snatchblock? I gather > you're not concerned with the stress of the anchor line on the > pulpit? > Thanks, > Joe > SeaFrog M17 > ----- Original Message ----- > From: bownez(a)juno.com > To: montgomery_boats(a)mailman.xmission.com > Sent: Wednesday, September 26, 2012 9:06 AM > Subject: Re: M_Boats: Anchoring > > > Hiya Larry, > > I liked your input on anchoring > Looks like I'll be buying a snatch block for my M17...... > > I can also testify that outboard motors with alternators will only > supply ample current when they are running at higher RPM. The output > voltage is also unregulated. > > Bones > > ____________________________________________________________ > Woman is 53 But Looks 25 > Mom reveals 1 simple wrinkle trick that has angered doctors... > > http://thirdpartyoffers.juno.com/TGL3141/5062fe0a4407c7e094b9dst02vuc > > >

2 1

Re: M_Boats: Anchoring
by bownez＠juno.com 26 Sep '12

26 Sep '12

Hiya Larry, I liked your input on anchoring Looks like I'll be buying a snatch block for my M17...... I can also testify that outboard motors with alternators will only supply ample current when they are running at higher RPM. The output voltage is also unregulated. Bones ____________________________________________________________ Woman is 53 But Looks 25 Mom reveals 1 simple wrinkle trick that has angered doctors... http://thirdpartyoffers.juno.com/TGL3141/5062fe0a4407c7e094b9dst02vuc

3 2

Pine Tar removal
by V Gates 26 Sep '12

26 Sep '12

We just returned from Loon Lake in the Sierra and our M 15 has a few small spots of pine tar. Is goof off safe to use on the fiberglass? Should one avoid the wood trim? Today we cleaned and waxed it and want to add the finishing touches. Also we noted the post about the M 15 for sale at Sacramento State Univ Aquatic Center. That is where we learned to sail. Valerie Gates Mistral

7 7

Re: M_Boats: M-15
by Stan Susman 25 Sep '12

25 Sep '12

Thanks Ian,dog bless you -----Original Message----- From: Ian Black Sent: Tuesday, September 25, 2012 5:29 PM To: Motgomery Boats Subject: Re: M_Boats: M-15 Hi Stan, I'm reasonably certain Jesus has a great sense of humor (if that's what you're referring to). Besides it was much more likely that Peter (the Big Fisherman) would have tuned the rigging. Ian > From: stanpfa(a)pacbell.net > Date: Tue, 25 Sep 2012 15:24:09 -0700 > To: montgomery_boats(a)mailman.xmission.com > Subject: Re: M_Boats: M-15 > > Oh great, I transmitted that to the whole world, off color joke and everything. What an a h---. Maybe I should go back to a dumb phone where I belong. > Wide spread apologizes to those offended by my immaturity. I promise to spend an hour in the ass kicking machine if I make it home. > > -----Original Message----- > From: Stan Susman > Sent: Tuesday, September 25, 2012 2:47 PM > To: For and about Montgomery Sailboats > Subject: Re: M_Boats: M-15 > > Can u make a few bucks on it. ?? > I can see it now. Look older M-15 owned and tuned by Jesus...only 6k > > How's everything ? > > -----Original Message----- > From: jerry montgomery > Sent: Tuesday, September 25, 2012 2:15 PM > To: montgomery forum > Subject: M_Boats: M-15 > > I just returned from the Sac State Aquatioc Center, where I looked at an early M-15. It was donated to them and is a steal at 2,500. incl trailer. > > We tapped it down for dry-rot (none) and played with the cb, which operated slicker than snot on a hot doorknob. It's sunburned but a day's work with a good buffer would do wonders. > > If interested email Gary Cook at gcook(a)saclink.csus.edu I don't think it will stick around long- if I didn't have a Sage I'd grab it. > > jerry > > -- > I am using the free version of SPAMfighter. > SPAMfighter has removed 7214 of my spam emails to date. > Get the free SPAMfighter here: http://www.spamfighter.com/len > > Do you have a slow PC? Try Free scan http://www.spamfighter.com/SLOW-PCfighter?cid=sigen > > > >

1 0

Re: M_Boats: M-15
by Stan Susman 25 Sep '12

25 Sep '12

Oh great, I transmitted that to the whole world, off color joke and everything. What an a h---. Maybe I should go back to a dumb phone where I belong. Wide spread apologizes to those offended by my immaturity. I promise to spend an hour in the ass kicking machine if I make it home. -----Original Message----- From: Stan Susman Sent: Tuesday, September 25, 2012 2:47 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: M-15 Can u make a few bucks on it. ?? I can see it now. Look older M-15 owned and tuned by Jesus...only 6k How's everything ? -----Original Message----- From: jerry montgomery Sent: Tuesday, September 25, 2012 2:15 PM To: montgomery forum Subject: M_Boats: M-15 I just returned from the Sac State Aquatioc Center, where I looked at an early M-15. It was donated to them and is a steal at 2,500. incl trailer. We tapped it down for dry-rot (none) and played with the cb, which operated slicker than snot on a hot doorknob. It's sunburned but a day's work with a good buffer would do wonders. If interested email Gary Cook at gcook(a)saclink.csus.edu I don't think it will stick around long- if I didn't have a Sage I'd grab it. jerry -- I am using the free version of SPAMfighter. SPAMfighter has removed 7214 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len Do you have a slow PC? Try Free scan http://www.spamfighter.com/SLOW-PCfighter?cid=sigen

3 2