May 2017 - montgomery_boats - mailman.xmission.com

Re: M_Boats: Sculling
by brad kurlancheek 29 May '17

29 May '17

you might start here (link below); also, googling "Yuloh" should turn up some good info on the topic http://www.you2repeat.com/watch/?v=AT0h0gY_JEk On Wed, May 24, 2017 at 2:00 PM, < montgomery_boats-request(a)mailman.xmission.com> wrote: > Send montgomery_boats mailing list submissions to > montgomery_boats(a)mailman.xmission.com > > To subscribe or unsubscribe via the World Wide Web, visit > https://mailman.xmission.com/cgi-bin/mailman/listinfo/ > montgomery_boats > > or, via email, send a message with subject or body 'help' to > montgomery_boats-request(a)mailman.xmission.com > > You can reach the person managing the list at > montgomery_boats-owner(a)mailman.xmission.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of montgomery_boats digest..." > > > Today's Topics: > > 1. Sculling oar for Montgomery 15 (Jim Sadler) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 24 May 2017 10:47:07 -0700 > From: "Jim Sadler" <jimsadler(a)jascopacific.com> > To: "'For and about Montgomery Sailboats'" > <montgomery_boats(a)mailman.xmission.com> > Subject: M_Boats: Sculling oar for Montgomery 15 > Message-ID: <003e01d2d4b5$c4f58700$4ee09500$(a)jascopacific.com> > Content-Type: text/plain; charset="us-ascii" > > Are any of you skippers using a sculling or instead of outboard? > > How does it workout? > > Capt Jim > Skipper sailing vessel Pelican (M15) > > -----Original Message----- > From: montgomery_boats > [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of > bownez(a)juno.com > Sent: Friday, May 19, 2017 5:22 AM > To: montgomery_boats(a)mailman.xmission.com > Subject: Re: M_Boats: Mpls M17 > > Hi Dan, > > Nokomis is quite a pond compared to Superior! > I had a buoy on that lake with my first daysailer, a Capri 14.2. > Are you in the neighborhood? > We should meet at Sandcastle for a bite and a beverage! > > Michael "Bones" Bowden > > M17 #92 > Former M23 #75 > ____________________________________________________________ > Police Urge Americans to Carry This With Them at All Times > The Observer > http://thirdpartyoffers.juno.com/TGL3141/591ee396413a639510c0st01vuc > > > > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > montgomery_boats mailing list > montgomery_boats(a)mailman.xmission.com > https://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > > Remember, there is no privacy on the Internet! > > > ------------------------------ > > End of montgomery_boats Digest, Vol 171, Issue 17 > ************************************************* >

6 6

Another M-17 on Lake Calhoun
by Rich Makela 25 May '17

25 May '17

This week I noticed another M-17 moored near mine on Lake Calhoun in Minneapolis - buoy #53 I think. The name on the stern is Chances R. I looks like a 1970s vintage like mine. Anybody know the owner? Rich Makela M-17 #233 - Harmony

1 0

Re: M_Boats: Mpls M17
by bownez＠juno.com 19 May '17

19 May '17

Hi Dan, Nokomis is quite a pond compared to Superior! I had a buoy on that lake with my first daysailer, a Capri 14.2. Are you in the neighborhood? We should meet at Sandcastle for a bite and a beverage! Michael "Bones" Bowden M17 #92 Former M23 #75 ____________________________________________________________ Police Urge Americans to Carry This With Them at All Times The Observer http://thirdpartyoffers.juno.com/TGL3141/591ee396413a639510c0st01vuc

1 0

Re: M_Boats: Mpls M17
by Dan Farrell 18 May '17

18 May '17

He is. Well, in as much as I lurk between inane questions :). She's #301 and I sail her weeknights and some weekends when I'm not up north on Superior. Dan Farrell M17 #301 bownez(a)juno.com wrote: >While biking around Lake Nokomis in south Mpls yesterday I saw a white M17 on a mooring ball. >I didn't catch the transom name. > >Is the owner a list lurker? > >Mr. Bones >____________________________________________________________ >37 Most Popular SUVs 2017 >money-rankings.com >http://thirdpartyoffers.juno.com/TGL3141/591c4836421f48356b3bst03vuc >

1 0

Re: M_Boats: montgomery_boats Digest, Vol 171, Issue 10
by Jon Barber 17 May '17

17 May '17

My question about standing rigging refers to the Monty 17. I installed reef hardware, outhaul and topping lift hardware this weekend and was able to test it all in 12- 17 mph winds. I'm looking at a boom kicker to go along with a vang. Does anyone have experience with the boom kicker? My one concern with this gooseneck not being fixed to the mast. I ordered a trackstop from West Marine to keep the boom from falling down when reefing. But I think a sliding gooseneck is not compatible with the boomkicker On May 13, 2017 11:00 AM, <montgomery_boats-request(a)mailman.xmission.com> wrote: > Send montgomery_boats mailing list submissions to > montgomery_boats(a)mailman.xmission.com > > To subscribe or unsubscribe via the World Wide Web, visit > https://mailman.xmission.com/cgi-bin/mailman/listinfo/ > montgomery_boats > > or, via email, send a message with subject or body 'help' to > montgomery_boats-request(a)mailman.xmission.com > > You can reach the person managing the list at > montgomery_boats-owner(a)mailman.xmission.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of montgomery_boats digest..." > > > Today's Topics: > > 1. Rigging (Jon Barber) > 2. how do I tell if Cetol was used on teak? (Robbin Roddewig) > 3. Re: Rigging (Dave Scobie) > 4. Re: how do I tell if Cetol was used on teak? (Dave Scobie) > 5. Re: how do I tell if Cetol was used on teak? (Robbin Roddewig) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 13 May 2017 06:39:21 -0700 > From: Jon Barber <brbrbarber(a)gmail.com> > To: montgomery_boats(a)mailman.xmission.com > Subject: M_Boats: Rigging > Message-ID: > <CAFwAWQuC49gAvcCJOwxm99DKmDUOWHQ2NYZabaMqhP+z=6f2mA@mail. > gmail.com> > Content-Type: text/plain; charset="UTF-8" > > How do I set up the tension on my standing rigging? > > > ------------------------------ > > Message: 2 > Date: Sat, 13 May 2017 10:21:31 -0400 > From: Robbin Roddewig <robbin.roddewig(a)verizon.net> > To: montgomery_boats(a)mailman.xmission.com > Subject: M_Boats: how do I tell if Cetol was used on teak? > Message-ID: <15c022f92d2-5508-4d99(a)webprd-a18.mail.aol.com> > Content-Type: text/plain; charset=utf-8 > > > Hi guys > I am working on a boat that has quite a bit of teak. I just got it and do > not know what the previous owner used. He sent all his supplies and they > included Cetol and varnish. > I want to go with just varnish as this is a traditional boat and varnish > is my preference. I have used Cetol and I know if works well. > My question is if Cetol was used how to I tell? And if it was used I am > inclined to strip it with a heat gun and start from bare wood. Any > suggestions would be appreciated. > > Thanks! > Robbin > Marshall 22 Otter, M-23 Pinch Me > > > robbin.roddewig(a)verizon.net > > > > > > > ------------------------------ > > Message: 3 > Date: Sat, 13 May 2017 08:43:58 -0600 > From: Dave Scobie <scoobscobie(a)gmail.com> > To: For and about Montgomery Sailboats > <montgomery_boats(a)mailman.xmission.com> > Subject: Re: M_Boats: Rigging > Message-ID: > <CAGjBOA4q2qH-UVeCDQH+_TPSi1C87NX8BpFj8qU4aGPV-jvnrA@ > mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Jon. > > To assist, as the boats differ, M15 or M17 or M23? > > > :: Dave Scobie > > > On May 13, 2017 7:39 AM, "Jon Barber" <brbrbarber(a)gmail.com> wrote: > > How do I set up the tension on my standing rigging? > > > ------------------------------ > > Message: 4 > Date: Sat, 13 May 2017 08:46:52 -0600 > From: Dave Scobie <scoobscobie(a)gmail.com> > To: For and about Montgomery Sailboats > <montgomery_boats(a)mailman.xmission.com> > Subject: Re: M_Boats: how do I tell if Cetol was used on teak? > Message-ID: > <CAGjBOA5hRNZ7PmaENR7M8qL+fEn=EGXknNXF3ZmOt4J-ma2Htw@mail. > gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Cetol usually has an orange 'tinge'. > > You wrote you inherited a can of Ceto. Which version? > > Also, what is the brand and version for the varnish? > > :: Dave Scobie > > On May 13, 2017 8:21 AM, "Robbin Roddewig" <robbin.roddewig(a)verizon.net> > wrote: > > > Hi guys > I am working on a boat that has quite a bit of teak. I just got it and do > not know what the previous owner used. He sent all his supplies and they > included Cetol and varnish. > I want to go with just varnish as this is a traditional boat and varnish is > my preference. I have used Cetol and I know if works well. > My question is if Cetol was used how to I tell? And if it was used I am > inclined to strip it with a heat gun and start from bare wood. Any > suggestions would be appreciated. > > Thanks! > Robbin > Marshall 22 Otter, M-23 Pinch Me > > > robbin.roddewig(a)verizon.net > > > ------------------------------ > > Message: 5 > Date: Sat, 13 May 2017 11:04:07 -0400 > From: Robbin Roddewig <robbin.roddewig(a)verizon.net> > To: montgomery_boats(a)mailman.xmission.com > Subject: Re: M_Boats: how do I tell if Cetol was used on teak? > Message-ID: <15c025694a8-6138-34e0(a)webprd-a103.mail.aol.com> > Content-Type: text/plain; charset=utf-8 > > Hi Dave > the Cetol was natural and then the clear coat. Not exactly sure as I > donated the cans to the local "for free" bin at the marina. > > He has the Interlux Schooner varnish which I like. > > Thanks Dave! > Robbin > > > > > > Robbin Roddewig > robbin.roddewig(a)verizon.net > > > > > > -----Original Message----- > From: Dave Scobie <scoobscobie(a)gmail.com> > To: For and about Montgomery Sailboats <montgomery_boats@mailman. > xmission.com> > Sent: Sat, May 13, 2017 10:47 am > Subject: Re: M_Boats: how do I tell if Cetol was used on teak? > > Cetol usually has an orange 'tinge'. > > You wrote you inherited a can of Ceto. Which version? > > Also, what is the brand and version for the varnish? > > :: Dave Scobie > > On May 13, 2017 8:21 AM, "Robbin Roddewig" <robbin.roddewig(a)verizon.net> > wrote: > > > Hi guys > I am working on a boat that has quite a bit of teak. I just got it and do > not know what the previous owner used. He sent all his supplies and they > included Cetol and varnish. > I want to go with just varnish as this is a traditional boat and varnish is > my preference. I have used Cetol and I know if works well. > My question is if Cetol was used how to I tell? And if it was used I am > inclined to strip it with a heat gun and start from bare wood. Any > suggestions would be appreciated. > > Thanks! > Robbin > Marshall 22 Otter, M-23 Pinch Me > > > robbin.roddewig(a)verizon.net > > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > montgomery_boats mailing list > montgomery_boats(a)mailman.xmission.com > https://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > > Remember, there is no privacy on the Internet! > > > ------------------------------ > > End of montgomery_boats Digest, Vol 171, Issue 10 > ************************************************* >

5 5

Mpls M17
by bownez＠juno.com 17 May '17

17 May '17

While biking around Lake Nokomis in south Mpls yesterday I saw a white M17 on a mooring ball. I didn't catch the transom name. Is the owner a list lurker? Mr. Bones ____________________________________________________________ 37 Most Popular SUVs 2017 money-rankings.com http://thirdpartyoffers.juno.com/TGL3141/591c4836421f48356b3bst03vuc

1 0

(no subject)
by jerry＠jerrymontgomery.org 17 May '17

17 May '17

On the M-12 mast- I don’t remember the forestay length but can answer the others. mast rake should be enough so that the boat has a light weather helm in all conditions. The rig should be a little loose; loose enough so that you can easily fasten the forestay.

1 0

Rigging the Montgomery 12
by Brad McMahan 16 May '17

16 May '17

Hello, Does anyone have advise/experience with rigging an M12? Shroud tension would be my first question. The original shrouds and terminal fittings came with. Forestay length and mast rake would be my second question. Original forestay was separated making it difficult to measure. Thank you, Brad

1 0

Re: M_Boats: how do I tell if Cetol was used on teak?
by Dave Scobie 14 May '17

14 May '17

Cetol usually has an orange 'tinge'. You wrote you inherited a can of Ceto. Which version? Also, what is the brand and version for the varnish? :: Dave Scobie On May 13, 2017 8:21 AM, "Robbin Roddewig" <robbin.roddewig(a)verizon.net> wrote: Hi guys I am working on a boat that has quite a bit of teak. I just got it and do not know what the previous owner used. He sent all his supplies and they included Cetol and varnish. I want to go with just varnish as this is a traditional boat and varnish is my preference. I have used Cetol and I know if works well. My question is if Cetol was used how to I tell? And if it was used I am inclined to strip it with a heat gun and start from bare wood. Any suggestions would be appreciated. Thanks! Robbin Marshall 22 Otter, M-23 Pinch Me robbin.roddewig(a)verizon.net

4 3

Rigging
by Jon Barber 13 May '17

13 May '17

How do I set up the tension on my standing rigging?

3 2