At Meredith College, we would prefer not to have the $x added. First of all, we do not currently index 8xx $x and would have to incur some expense to change that. Second, this information is nearly useless for most users and only slightly less so for library staff. Ted Waller ----- Original Message ----- From: "Margaret Kaus" <mkaus@k-state.edu> To: "Backstage Library Works Authority Contol Listserv" <bslwac@mailman.xmission.com> Sent: Wednesday, September 16, 2009 2:26:19 PM GMT -05:00 US/Canada Eastern Subject: Re: [BSLWAC] $x now valid in 8XX series fields - your feedback requested Here at K-State, we prefer the $x not be allowed in the 8xx fields. As a Voyager library, the $x in the 440 is problematic enough. When doing a left anchored search, if the $x is present, Voyager does not know to ignore the $x. So, if you were looking for Safety reports series,$x1020-6450 ;$vno. 58, you have to type in the $x to find this string. (I believe a lot of other systems are smart enough to ignore the $x in the 440 when using a left-anchored search). I do not want to introduce this problem into the 8xx searches. Having it in the 4xx is bad enough. Also, since OCLC is our primary source for bibliographic records, we prefer to adopt their practices. Margaret Kaus Authorities Coordinator From: bslwac-bounces@mailman.xmission.com [mailto:bslwac-bounces@mailman.xmission.com] On Behalf Of Judy Archer Sent: Thursday, September 10, 2009 2:02 PM To: Chad Cluff; Backstage Library Works Authority Contol Listserv Subject: [BSLWAC] $x now valid in 8XX series fields - your feedback requested Hello Everyone, we are looking for feedback from our community: MARC Proposal No. 2008-06 requested that $x ISSN's be allowed in 8XX fields ( http://www.loc.gov/marc/marbi/2008/2008-06.html ) and the proposal was approved by Library of Congress on October 2, 2008. Just recently OCLC has decided to begin allowing $x too (see their July 2009 Technical Bulletin 257 found at: http://www.oclc.org/support/documentation/worldcat/tb/257/default.htm . With LC's switch from 440 to 490 and our programming changes to accommodate this, many of you are now getting $x ISSN subfields in your Bibliographic 8XX s. This has been causing some concern and at least in one scenario, it creates a problem situation as follows: original bib headings : 490_1 $aSTI/PUB ;$v1343 490_1 $aSafety reports series,$x1020-6450 ;$vno. 58 830_0 $aSafety reports series ;$vno. 58. after processing : 490_1 $aSTI/PUB ;$v1343 490_1 $aSafety reports series,$x1020-6450 ;$vno. 58 830_0 $aSafety reports series ;$vno. 58. 830_0 $aSafety reports series,$x1020-6450 ;$vno. 58. The resulting 830s happened this way because the 8XXs must link up with 490-1's. The system assumes the first 8XX belongs to the first 490-1 so it retained " Safety report series ;$vno. 58 ." Since it "thought" there was no 8XX for the second 490-1 an 8XX was created for it. Unfortunately it was the first 490-1 that was missing a linking 8XX. What is your practice regarding 8XX $x? Since this is now an allowable subfield and we follow LC procedures, what will this do to your system? Your feedback would be very welcome and much appreciated. Feel free to respond to this e-mail or talk about it on our Forum at: http://ac.bslw.com/community/forum/viewtopic.php?f=10&t=34 Thanks, Judy -- Judy Archer MARS Project Manager Backstage Library Works 1-800-288-1265 ext. 254 jarcher@bslw.com -------- Margaret Kaus Associate Professor Original Cataloger KSU Libraries 509 Hale Manhattan, KS 66506-1200 785-532-7263 fax: 785-532-7644 mkaus@ksu.edu _______________________________________________ BSLWAC mailing list BSLWAC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/bslwac